End Suction Fire Pumps UL Listed
End Suction Fire Pumps UL Listed pumps are typically used in fire-fighting applications for supplying water to fire hose reels, fire hydrants or sprinkler systems.
Pumps have a discharge range from 50 to 1000 USgpm and the head range from 3.72 to 9.9 bar. These fire pumps meet or exceed the requirements of NFPA20.
Installations of these pumps would ensure the safety of human life, buildings, and expensive equipment’s and plants. FLBS fire pumpset shall be used only where a positive suction is provided as specified in NFPA20.
There fire pumps typically consists of the following equipment’s:
• Single-Stage End-Suction pump
• Electric motor or Diesel Engine
• Cooling system for Diesel Engine
• Fuel system for Diesel Engine
• Battery for Diesel Engine electric start
• Exhaust system for Diesel Engine
• Diesel Engine / Electric Motor Fire pump controller
• Suction and Discharge pressure gauges
• Casing Relief Valve for Motor Fire pump
• Base frame
Description
Product Specifications
| Theory | Centrifugal Pump |
| Flow Rate | 1 TO 2280 |
| Head Size | 40 TO 191 psi |
| Max Suction | 150 |
| Material | CI, SS304 , Bronze |
| Structure | Single Stage Pump |
| Power | Electric |
| Fuel Type | Diesel |
| Pressure | Medium Pressure |
| Usage | Cosmetics, Automobile, Water Well, Water |
| Application | Fire |
| Suction Type | negative |
| Seals Type | MECHNICAL SEAL |
| Priming | self priming |
| Brand | LUBI / CRI / Kirloskar |
Features
- Installations of these pumps would ensure the safety of human life, buildings, and expensive equipment’s and plants. FLBS fire pumpset shall be used only where a positive suction is provided as specified in NFPA20.
- Diesel engine as well as electric motor driven pump.
- Back pull-out design which simplifies inspection and maintenance without disturbing pipe work.
- The pump casing shall have material of construction of Cast Iron FG 260 (standard supply), CF8, CF8M, axial suction and radial discharge port, dynamically balanced impeller, steel shaft, stainless steel shaft sleeve.
- The pump shaft sealing will be by either gland packing or mechanical shaft seal suitable for 16 bar or 25 bar pressure rating based on shut off pressure of the pump.
- The pump shall have closed type impellers and bowl diffusers with material of construction stainless steel AISI 304 sheet metal, pump shaft shall be made of stainless steel AISI 316 material.
- The pump shall have back pull out design so as to enable the rotating parts to be removed and serviced without dismantling the suction and discharge pipe work.
Benefits
- State-of-the-art design fire pumping system.
- NFPA-20 design
- Compact diesel Engine driven pump package
- Rugged construction
- More economical than Horizontal Split Case diesel fire pump packages
- Back pull-out design which simplifies inspection and maintenance without disturbing pipe work
- The pump impellers are dynamically balanced to grade 6.3 of ISO 1940-1
- Efficient operation
- Lower initial cost
- Reduced installation time and cost
- Easy access to all working parts
- Ease of maintenance
- Single source unit responsibility.
Applications
The FLBS fire pumpsets are used in small capacity, diesel Engine or motor driven fire-fighting applications for supplying water to fire hose reels, fire hydrants or sprinkler systems in areas which are prone to the hazards of fire.
The typical applications are as follow:
• Commercial complexes & high rise buildings
• Petrochemical industries and Gas plants
• Airports and ports
• Jetties
• Marine applications
• Power stations and transformer stations
• Chemical industries
• Manufacturing plants
• Fire-work industries
• Warehouses / godowns
